Employers: Facing an issue or have a question? Get free initial guidance.

Apprentice and Trainee Pay Rates: Employer Guide 2026

Australian employer and young apprentice reviewing apprentice wages and pay rates documents in a workshop office

Quick Summary

Quick Summary

  • Apprentice wages are award-based minimum rates set by the modern award covering the trade — there is no single national apprentice rate.
  • Rates step up each year of the apprenticeship and are higher for adult apprentices (21 and over).
  • All modern award rates, including apprentice and trainee scales, increased by 4.75% from 1 July 2026.
  • Trainees are paid under National Training Wage arrangements, which differ from trade apprentice scales.
  • Off-the-job training (TAFE) time is generally paid time under most awards.
  • Confirm every apprentice rate with the FWO Pay and Conditions Tool for your award.

You have hired your first apprentice and the first payslip is due. Apprentice wages are minimum rates set by the modern award covering the trade — there is no single national apprentice rate. The rate depends on the award, the year of the apprenticeship, and the apprentice’s age, and apprentice rates rose 4.75% on 1 July 2026 under the Fair Work Commission’s Annual Wage Review. In most awards a first-year apprentice earns a set percentage of the qualified tradesperson rate — commonly between 40% and 55% — stepping up each year to roughly 85–90% by the final year. The only reliable way to confirm the exact figure is the Fair Work Ombudsman‘s Pay and Conditions Tool. Apprentice rates can lawfully sit below the national minimum wage — but paying below the award is an underpayment the FWO actively pursues.

How apprentice wages are set: the award decides

Every apprentice is covered by a modern award containing a pay scale specifically for apprentices — expressed either as a percentage of the tradesperson classification or as fixed rates for each year. The award is the legal floor: you can pay more, never less.

So the first step is identification, not calculation. An electrician, a carpenter and a hairdresser can all start apprenticeships the same week and all be on different rates, because each sits under a different award. Getting the award wrong is the most common cause of apprentice underpayments we see. Our modern awards compliance guide walks through the classification process step by step.

Award Typical trades covered
Electrical, Electronic and Communications Contracting Award Electricians, communications technicians
Building and Construction General On-Site Award Carpenters, bricklayers, concreters
Plumbing and Fire Sprinkler Award Plumbers, gas fitters, sprinkler fitters
Manufacturing and Associated Industries and Occupations Award Fitters, machinists, boilermakers
Joinery and Building Trades Award Joiners, shopfitters, cabinet makers
Hair and Beauty Award Hairdressers, beauticians — see our Hair and Beauty Award pay rates guide
Vehicle Repair, Servicing and Retail Award Motor mechanics, diesel mechanics, panel beaters

Office-based trainees are usually covered by the Clerks – Private Sector Award or the Miscellaneous Award rather than a trade award — another reason blanket assumptions cause underpayments.

Apprentice wages by year of apprenticeship

A full-time trade apprenticeship typically runs three to four years, and the rate steps up at each stage as the apprentice’s skill grows. When an apprentice reaches the next year or completes a training stage, you must move them onto the next rate from the correct date. Backdating the increase “when you get around to it” creates an underpayment debt that follows the relationship long after the apprentice is qualified.

Apprentice wages by age: juniors, adult apprentices and school-based

Age changes the calculation. Apprentices who start at 21 or older are “adult apprentices” and most awards set a significantly higher minimum rate for them than for a school leaver — applying junior rates to a mature-age first-year is one of the most common apprentice payroll errors. School-based apprentices are paid for the hours they actually work, at junior rates, under the award’s school-based clause.

⚠️ Rates changed on 1 July 2026

The Fair Work Commission lifted modern award minimum wages by 4.75%, including apprentice and trainee scales. If your apprentice payroll still runs on 2025-26 rates, you are underpaying now — and the debt grows every payslip.

Key Takeaways

Key Takeaways for Employers

  • ✓Identify the correct award before setting any apprentice rate — the wrong award is the most common underpayment cause.
  • ✓Update payroll for the 4.75% increase that applied from 1 July 2026.
  • ✓Apply adult apprentice rates for anyone who starts an apprenticeship at 21 or older.
  • ✓Pay for off-the-job training time and check tool allowance obligations in the award.
  • ✓Re-check apprentice and trainee rates every July and keep wage records for seven years.

Fair Work Centre

Need help with modern awards compliance?

Our employment lawyers advise employers only — no call centres, no generalists. Get straight answers from people who know the Fair Work Act inside out.

Free Templates

Get free employment agreement templates — Basic, Full-Time, Part-Time & Casual.

Download Free Templates

Who pays apprentice wages — and what the government covers

The employer pays apprentice wages through normal payroll, exactly like any other employee. Government incentives and support payments administered through the Australian Apprenticeships system from 1 July 2026 subsidise training costs, but they never replace your payroll obligation — check current eligibility at AustralianApprenticeships.gov.au before you budget. The training contract itself must also be registered with your state training authority through an Apprenticeship Support Network provider, and the contract’s probation period is separate from probation under the employment agreement.

Apprentice wage increase 2026: the 4.75% change you must pass on

The Fair Work Commission‘s Annual Wage Review 2026 increased all modern award minimum wages by 4.75%, effective from the first full pay period on or after 1 July 2026. Under the Fair Work Act 2009 those award rates are the legal floor for every apprentice in the country, so apprentice scales rose too. If your payroll still runs on 2025-26 apprentice rates, you are underpaying right now. Our fast food award pay rates guide shows how the increase flowed through to one award in practice.

Trainee pay rates: how they differ from apprentice wages

Traineeships are not apprenticeships. Trainees usually complete a certificate (typically Certificate II, III or IV) over 12 to 24 months in areas like retail, business, childcare or community services. Trainee pay is set by the National Training Wage arrangements in the relevant award, with separate scales for full-time, part-time and school-based traineeships. The same rules apply: identify the award, apply the correct scale for the qualification and age, and pass on the 1 July increase — a trainee rate set 12 months ago is almost certainly stale.

Paid training time, tool allowances and your other obligations

Time at TAFE or another registered training organisation is generally paid time at the applicable apprentice rate — day release, block release or both — and awards may require you to reimburse fares or accommodation for block training away from the usual location. Apprentices and trainees also accrue the National Employment Standards from day one of the training contract. Diarise tool allowances (payable once the apprentice supplies their own tools in many awards), supervision requirements, and seven-year record-keeping.

Common apprentice pay mistakes employers make

The patterns repeat in almost every audit: a flat “apprentice rate” copied from another business without identifying the award; missing the 1 July increase; junior rates applied to an adult apprentice; unpaid TAFE weeks; cash rates that ignore allowances and loadings. Apprentice underpayments are a standing FWO enforcement priority, because the employees affected are young and unlikely to complain. Document every rate decision — award, classification, year, age, loading and allowances — alongside the training contract, and use our free employment document templates for agreements and payroll checklists you can adapt.

Frequently Asked Questions

It depends on the award covering the trade, the year of the apprenticeship and the apprentice’s age — there is no single national rate. In most awards a first-year earns roughly 40% to 55% of the qualified tradesperson rate, stepping up each year to around 85% to 90% by the final year. All apprentice rates rose 4.75% from 1 July 2026. Confirm the exact figure for your apprentice with the FWO’s Pay and Conditions Tool after identifying the award.

Because modern awards lawfully set lower minimum rates for apprentices than the national minimum wage. The reduced rate reflects the structured training you provide and the trade qualification the apprentice gains. The award apprentice rate is still a legal minimum — paying below it is an underpayment, even if the business agreed a ‘training rate’ with the apprentice.

The employer pays apprentice wages through normal payroll, the same as any other employee. Government incentives and support payments through the Australian Apprenticeships system can subsidise training costs, but they never replace the employer’s obligation to pay at least the award rate.

In most awards, yes. Time spent at off-the-job training — day release or block release — is generally paid at the applicable apprentice rate, and some awards also require reimbursement of travel or accommodation costs for block training. Check the training clause of your award before treating TAFE attendance as unpaid.

Apprentices learn a trade over three to four years and are paid under the apprentice scales of a trade award. Trainees complete a shorter qualification, often 12 to 24 months, and are paid under the National Training Wage arrangements in the award covering them, with separate scales for full-time, part-time and school-based traineeships.

Apprentices who start at 21 or older are adult apprentices, and most awards set a higher minimum rate for them than for juniors in the same year. A mature-age first-year can be entitled to significantly more than a school leaver, so applying junior rates to an adult apprentice is a common underpayment error.

Yes. The Fair Work Commission’s Annual Wage Review 2026 lifted all modern award minimum wages by 4.75% from the first full pay period on or after 1 July 2026, including apprentice and trainee scales. Payroll systems running 2025-26 rates are underpaying.

No. Modern awards apply nationally, so the same trade, year of apprenticeship and age attracts the same minimum rate in every state and territory. State laws differ on training contracts and school-based arrangements — but not on minimum pay.

Join Fair Work Centre

Protect your business with the right HR support.

Join hundreds of Australian employers who rely on Fair Work Centre for employment law advice, HR documents, and Fair Work Commission representation.

Disclaimer: Fair Work Centre is an independent private organisation providing advisory services to employers only. It is not associated with or authorised by the Fair Work Ombudsman, the Fair Work Commission, or any government authority. This article contains general information only and does not constitute legal advice. For advice specific to your circumstances, speak to one of our employment lawyers.
imgLeft

Get Your FREE Employer’s Quick Guide to Avoiding Termination Claims.

Protect your business from costly legal disputes with practical, step-by-step guidance.

This field is for validation purposes and should be left unchanged.

What’s your goal today?

1

If you’re an employer seeking guidance about an employee issue:

  • Workplace Advice: Not a member? Call us today on 1300 161 828 to see how we can help you and your business.
  • Client Membership Pricing: For unlimited employment law advice, HR documents/templates, and ongoing support, consider joining as a client member. Learn about becoming a client member here.
3

If you are a employer who wants to log in:

  • Already a member? Log in here to access all your resources, including templates and expert guidance.
2

If you are an employee:

4

Join our team.

  • We’re always looking for the best talent. If you’re an Employment Lawyer with 10+ years of experience and a passion for small business, start a conversation with us.
5

Contact us.

Free Initial Legal Guidance For Employers

Speak to an Employment Lawyer at Fair Work Centre

To change or request cancellation of your Client Membership, please email us with your request at: info@fairworkcentre.com.au.

Refer to our Terms of Service for changes or cancellation requests.

Request Call Back

Employers / HR Managers:  1300 161 828
Employees / Workers:  13 13 94

If you would like more information about any of our professional products or services, feel free to contact us, or simply fill in our enquiry form.

You must be logged in to submit this form